Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Orlando?
Panel replacement in Orlando typically costs $250 – $500 for a standard steel garage door panel, including the service call, labor, and hardware. Most single-panel replacements we do in the Orlando metro run between $290 and $420, though wood or insulated panels push that higher. The price you’ll see is the price you’ll pay: we hand you a written quote before any work starts, and that number doesn’t move.
If you’re staring at a caved-in panel right now and want to skip the reading, call (850) 790-4744 and we’ll give you a straight price over the phone. Jaylen Ross and the rest of our Orlando team answer live, 24/7, no voicemail maze.
Key Takeaways
- Average cost in Orlando: $250 – $500 per panel replacement, with most jobs landing between $290 – $420.
- Biggest price drivers: panel material, insulation, brand, and whether the door is single or double-wide.
- Repair vs. replace: one panel almost always beats a new door on cost, unless the door is 15+ years old and worn in multiple places.
- Same-day service: we carry common panel sizes on the truck; uncommon sizes may take 3 – 5 business days to order.
- Every panel replacement is covered by our 365-Day Done Right Promise. If something’s not right, we come back free.
Panel Replacement Cost Breakdown (2026)
Here’s what a panel replacement actually costs in the Orlando market this year, line by line. These aren’t “starting at” numbers designed to bait a call. They’re the real ranges we quote, day in and day out, from Dr. Phillips to Winter Park to Lake Nona.
| Cost Component | Typical Range | Notes |
|---|---|---|
| Single steel panel (non-insulated) | $110 – $210 | Most common; matches 90% of residential doors in Orlando |
| Insulated steel panel | $180 – $330 | Recommended if your garage gets direct afternoon sun |
| Labor & hardware | $100 – $180 | Includes hinges, rollers, alignment check, and disposal of the old panel |
| Service call / diagnostic fee | $40 – $75 | Waived when we do the repair |
| Crane or lift work (2nd-story doors) | $150 – $300 | Rare, but we see it in downtown Orlando condos and custom homes |
Total: $250 – $500 for a standard single-panel replacement in Orlando.
If you’re replacing two or three panels after a Hurricane-season branch hit or someone backed into the door, the per-panel cost drops slightly, but the total climbs. We’ll itemize everything so you see exactly where the money goes.
What Drives the Cost Up
Orlando’s mix of housing stock means we work on everything from 1980s Oviedo ranchers with builder-grade doors to modern custom homes in Windermere with full-view glass aluminum doors. The panel price shifts with four things: the material, the insulation, the brand, and the size.
Wood overlay panels are the priciest, often $400 – $600 for the panel alone before labor. Full-view glass panels on aluminum frames run even higher and typically need special order. If your door is a Clopay or Amarr with a custom paint code, that adds a factory color-matching step and a few days of lead time.
But here’s what most people don’t expect: the panel is usually the cheaper part of the equation. The labor, the hardware refresh, and getting everything aligned so the door doesn’t bind on one side are where the real skill comes in. A panel that’s swapped but slightly misaligned will eat through rollers and throw off the spring balance in a few months. That’s the kind of fix our 365-Day Done Right Promise covers: free second visit, no arguing.
What Affects Panel Replacement Pricing in Orlando
- Panel material and insulation. Steel is cheapest. Insulated steel adds $70 – $120. Wood and glass run significantly more. In Orlando’s summer humidity, we recommend at least a basic insulated panel if the garage is attached to the house and used for anything beyond pure storage.
- Door brand and availability. LiftMaster and Chamberlain dominate the Orlando suburbs, but panels are door-specific, not opener-specific. Common brands like Clopay, Amarr, and Wayne Dalton are usually in stock or ready in a day or two. Raynor and some Craftsman lines take longer because supply channels are thinner in Central Florida.
- Single vs. double-wide doors. A single-car door panel is typically 8 or 9 feet wide. A double door panel is 16 feet and costs roughly 40 – 60% more. Double-wide panels also need two technicians for safe handling.
- Damage to surrounding hardware. When a panel gets hit hard enough to need replacement, the bottom rollers, hinges, and sometimes the track take a hit too. We check all of it and quote the full repair before touching anything, so you’re not surprised by an “add-on” at the end.
- Neighborhood density and access. Tight driveways in Thornton Park or College Park can slow things down, but our pricing is flat-rate, not hourly. You’ll know the number before we start, whether you’re in Baldwin Park or Kissimmee.
- Urgency. Same-day emergencies don’t cost more with us. If you need your door secured tonight because there’s a hole big enough for a raccoon, we’ll get a tech out and the written price stays the same as a scheduled visit.
Panel Replacement vs. Full Door Replacement: Which Makes Sense?
This is the question you’re actually asking, even if you’re searching “panel replacement cost Orlando.” Here’s the straight answer: if the damage is isolated to one or two panels and the door is under 12 – 15 years old, panel replacement is the right call. If the door is older, rusty at the seams, has multiple damaged sections, or you’ve been nursing failing springs and squealing rollers anyway, a new door may actually be the smarter money.
In Orlando, entry-level new steel doors run $700 – $1,100 installed. Mid-range insulated doors with better seals and quieter tracks run $1,200 – $2,200. Compare that to a $350 panel replacement on a door that’s got five or six good years left. The panel wins almost every time.
But if we’re replacing three panels at $250 each and you’re $750 in on a door that’s already showing rust on the bottom seal and a spring that’s near the end of its rated life, that’s when the numbers flip. We’ll tell you that straight. It’s not in our interest to upsell you into a new door if a panel fixes the problem, and it’s not in yours to patch a door that’s circling the drain.
How the Panel Replacement Process Works
If you’ve never dealt with garage door repair before, here’s what to expect when you call (850) 790-4744. It’s a lot less painful than most home service calls.
- You call or book online. A live person answers, 24/7. No voicemail, no “press 2 for service.” You describe the damage, we ask a few questions, and we schedule a time that works for you. Book online and you’ll skip the phone entirely if you prefer.
- We give you a live arrival window. This is The Relay Visibility Guarantee, and it’s the thing most Orlando homeowners tell us they’ve never seen from another garage door company. You get a real-time tracking link so you can see exactly when your tech pulls up. No four-hour waiting blocks.
- The tech inspects and quotes. A background-checked, uniformed Marlow technician examines the panel, the hinges, the track, and the spring balance. You get a written price before any work begins. If the number doesn’t sit right, we shake hands and leave, no charge for the assessment.
- The panel is replaced. For common steel panels, this takes 45 – 90 minutes. The tech swaps the panel, installs fresh hinges and rollers as needed, and re-ensures the door balances correctly. If the spring needs adjustment, that’s part of the same visit.
- You pay from a link. Digital invoice, payment by phone, done. You’ll also get before-and-after photos so there’s no question about what changed.
- You’re covered for 365 days. If anything about the panel, the install, or the hardware fails within a year, we come back and make it right at no charge. That’s the 365-Day Done Right Promise, in writing on every invoice.
How to Save on Panel Replacement in Orlando
Panel replacement isn’t really a service you want to bargain-hunt. The cheapest quote is usually the one that skips hardware replacement, skips alignment, and skips out on you when something goes wrong six weeks later. That said, there are a few legitimate ways to keep costs down without cutting corners.
- Address damage early. A small dent that hasn’t compromised the panel structure can sometimes be popped back into place for under $200. Once the panel is creased or split, replacement is unavoidable. The sooner you call, the more options you have.
- Match the panel rather than upgrading it. If your door is a basic non-insulated steel door, you don’t need to upgrade to an insulated panel unless you want the thermal benefit. Matching what’s there keeps the cost at the low end of the range.
- Bundle the spring check. While we’re out for a panel, a spring that’s near the end of its cycle life will get flagged. If you’re already paying for the visit, addressing the spring at the same time saves you a second service fee later. Spring replacement in Orlando runs $180 – $340, and catching it before it snaps is always cheaper than dealing with the aftermath.
- Get the free quote. Our estimates don’t cost a thing, and the written price is exactly what you’ll pay. Call (850) 790-4744 and know the number before you commit.
Orlando-Specific Factors Most Websites Don’t Mention
Orlando is a unique market for garage door work, and a few local realities affect panel pricing and timing in ways you won’t find on a generic national cost site.
Hurricane season is a real cost factor. From June through November, wind-borne debris is the #1 cause of panel damage we see. A standard non-insulated steel panel takes a 2×4 at 80 mph about as well as you’d expect. While panel replacement costs don’t spike during storm season (we keep our pricing flat), lead times on special-order panels can stretch to a week or more after a big storm hits. If your panel damage is hurricane-related and your door is opened daily, don’t wait to call. A compromised panel puts extra strain on the rollers, hinges, and spring, and one broken component cascades into two or three.
Humidity and salt air accelerate panel wear. Homes east of I-4 toward Orlando’s lake country, and especially properties closer to the coast in Brevard or Volusia, see accelerated rust on non-galvanized panel hardware. When we replace a panel, we always inspect the bottom seal and the galvanization on the hinges. If you’ve got rust bleed at the panel seams, that’s the canary in the coal mine. We’ll tell you what’s cosmetic and what’s structural, and we won’t sell you a panel if a hinge replacement ($110 – $220 for rollers, $130 – $250 for cables) solves the actual problem.
HOA regulations are a factor in some Orlando neighborhoods. Communities like Baldwin Park, Celebration, and parts of Winter Garden have architectural review boards with door appearance requirements. If your HOA specifies a particular panel style or color, that can push you toward a custom factory order. We’ve worked with enough Orlando HOAs to know which panel styles pass the look-and-see test, and we’ll flag it before you order something that gets you a violation letter.
Orlando’s heat affects panel longevity. West-facing garage doors in neighborhoods like Metrowest and Windermere take brutal afternoon sun. Non-insulated panels absorb that heat and transfer it into the garage, which is why we see a lot of sectional door warping in those areas. If you’re replacing a panel anyway, this is the moment to consider an insulated panel. It runs about $70 – $120 more per panel, but it’s better at resisting heat warping and it keeps the garage noticeably cooler through July and August.
Brands We See Most Often in Orlando
Our technicians are factory-trained on eight major garage door brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Why does that matter for you? Because the tech who shows up at your door already knows your specific door’s panel dimensions, hinge spacing, and hardware specifications. We don’t spend the first 20 minutes figuring out what kind of door you have. We know it when we see it.
The most common residential doors in the Orlando market are Clopay and Amarr steel sectional doors from the last 10 – 15 years, with Wayne Dalton showing up a lot in homes built in the 90s and early 2000s. Older Orlando homes in neighborhoods like Colonialtown and Delaney Park sometimes still have wood doors or early-generation steel, and those are where panel sourcing gets trickier. We’ll give you an honest lead time when that’s the case, not a vague “we’ll call you when it’s in.”
If you’re in the market for a full panel replacement and want to know which brands we carry and which we recommend for Orlando’s climate, start with our Panel Replacement in Orlando page for the full breakdown. For anything else, our home page covers the range of what we do, from spring repair to full door installation.
FAQs – Panel Replacement Cost
How much does it cost to replace one garage door panel in Orlando?
A single panel replacement in Orlando typically costs $250 – $500 installed, including the panel, labor, hardware, and service call. Most standard steel panel replacements fall between $290 and $420. The exact figure depends on panel material, insulation, and brand. Call (850) 790-4744 for a free written quote, and that exact figure is what you’ll pay.
Is it cheaper to replace a panel or the whole door?
For a door under 12 – 15 years old with isolated damage, panel replacement is almost always cheaper, typically $250 – $500 versus $700 – $2,200 for a new door installed. If the door is older, has multiple damaged sections, or has failing springs and rusted hardware, a new door may be the better long-term value. We’ll tell you which makes sense for your specific door and show you the numbers side by side.
Can you replace a garage door panel the same day?
Yes, for common steel panel sizes we carry on the truck or in local stock, we can replace a panel the same day you call. Uncommon sizes, wood overlay panels, and full-view glass panels typically take 3 – 5 business days to source. If you’re in an emergency situation with a hole in your door, we’ll secure it same day even if the replacement panel needs to be ordered. Call (850) 790-4744 and we’ll tell you right away what’s possible for your door.
Does panel replacement come with a warranty?
Every panel replacement from Marlow Garage Door Repair is covered by our 365-Day Done Right Promise. If anything about the panel, the installation, or the surrounding hardware fails within a full year, we come back and fix it at no charge. That’s written on every invoice. We also honor the manufacturer’s warranty on the panel itself, which varies by brand.
What’s the most expensive part of a panel replacement?
The panel itself is usually the biggest single line item, ranging from $110 – $330 depending on material and insulation. But the labor, hardware, and proper alignment are where the value is. A misaligned panel will destroy rollers and stress the spring in months. Labor and hardware together usually run $140 – $255 of the total.
Do you charge more for emergency or after-hours panel replacement?
No. Our pricing is flat and transparent whether you call at 2 p.m. on a Tuesday or 2 a.m. on a Saturday. You’ll get the same written quote before work starts, and the same price whether it’s scheduled or same-day emergency. Live phone support is available 24 hours a day, 7 days a week.
What Orlando Homeowners Should Know Before Calling
Before you commit to any panel replacement quote, here are the three questions to ask, and the answers you should expect from a reputable Orlando garage door company.
1. “Is the price locked?” If the answer is anything other than “yes, in writing, before we start,” walk away. Post-visit upcharges are the oldest trick in the home-service book. Our written price is the price on the invoice, every time. That’s the Rhythm of how we operate and we say it plainly on every call.
2. “What’s covered if it fails?” A panel that slides out of alignment or a hinge that fails three weeks after install should be on the installer, not you. Our 365-Day Done Right Promise covers the panel, the mount, and the hardware for a full year. Free second visit, no fine print.
3. “Who exactly is coming to my house?” We send background-checked, uniformed technicians whose name and photo show up in your booking confirmation before they arrive. In neighborhoods from Lake Nona to Apopka, knowing who’s at your door matters. You’ll see your tech on the way with The Relay Visibility Guarantee, not wonder when or if someone will show.
If you’ve got a panel that’s dented, warped, cracked, or just ugly, start with a phone call. Call (850) 790-4744 and talk to a live person who can give you a realistic price range for your specific door, today. If you’d rather not call, book online and get the same written pricing before any work begins.
Pricing reflects the Orlando market as of 2026. Marlow Garage Door Repair Orlando offers free estimates – call (850) 790-4744.
Written by Jaylen Ross, Owner at Marlow Garage Door Repair, serving Orlando since 2002.
What Our Customers Say
"Rollers and hinge swap for a noisy door. Quiet now. No phone tag at all."
- Alexis F."Safety sensors realigned. Tech texted before arriving and after finishing."
- Candice L."Opener remote stopped working. He reprogrammed it and replaced the battery contacts. Paid by link on my phone."
- Latoya S.