Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateTrusted Garage Door Repair for Orlando Homeowners
A garage door that won’t open, won’t close, or sounds like it’s tearing itself apart isn’t something you plan around. It’s the thing that makes you late for work, leaves your car trapped, and turns your attached garage into an unsecured entry point overnight. Garage door repair in Orlando typically runs $150 to $600, and when you call Marlow Garage Door Repair Orlando at (850) 790-4744, you get a live person, a written price before we start, and a technician you can track on your phone before they arrive. We’ve been fixing doors across Central Florida since 2002, and Jaylen Ross leads a team that trains on eight major brands before they ever set foot in your driveway.
That live-tracking piece matters more than most people realize. You’re not committing to a half-day waiting window. You’ll see exactly when your tech leaves, where they are en route, and when they pull up. And because every job starts with a written price, the number you agree to is the number you pay. No surprises, no “well, once we got in there” adjustments. That’s how we’ve run things since 2002, and it’s why Orlando homeowners keep our number saved.
Garage Door Sensor Repair
Garage door sensor repair fixes the photo-eye safety sensors mounted a few inches off the ground on either side of your door opening. These little units shoot an invisible beam across the threshold, and when that beam gets blocked, misaligned, or a sensor goes bad, your door refuses to close, or reverses halfway down, or blinks its opener light at you like it knows something you don’t. In Orlando, sensor repair typically falls in the $120 to $320 range, depending on whether we’re fixing a wiring fault, realigning the units, or replacing a sensor entirely. We carry replacement sensors for Chamberlain, Genie, and most other major brands on the truck, so it’s usually a same-visit fix.
Misaligned or Obstructed Sensors
Most sensor problems in Orlando homes trace back to simple misalignment. A bump from a trash can, a bike leaning against the rail, or the natural expansion of metal in Florida humidity knocks one sensor a few degrees off. We check the beam alignment with a level and the sensor’s own indicator light before recommending any parts replacement.
Wiring and Logic Board Faults
Sometimes the sensor itself is fine and the problem sits in the low-voltage wiring running up to the opener, or in the opener’s logic board that reads the sensor signal. Mice chewing through wire jackets in a garage is more common than you’d think, and heat stress on older boards isn’t rare in Orlando summers. We trace the circuit before we replace anything, so you’re not paying for parts you didn’t need.
Styles & brands we work with
Emergency Garage Door Repair
Emergency garage door repair is what you need when the door is stuck open and you can’t secure the house, or stuck shut with a car trapped inside and your day already falling apart. Marlow Garage Door Repair Orlando answers live 24/7, which means you’re not leaving a message while your garage sits wide open at midnight. Emergency repairs in Orlando usually run $150 to $600 depending on what failed, and our techs stock the most common springs, cables, rollers, and opener parts on every truck. You’ll get a written price before the first wrench turns, even at 2 a.m.
Spring and Cable Failures
A snapped torsion spring sounds like a gunshot inside your garage, and it leaves the door dead weight on the tracks. That’s a job for a trained pro with the right winding bars and a healthy respect for stored tension. We carry springs matched to your door’s weight and cycle rating, and we replace them in pairs so you’re not back in the same spot in six months.
Door Off Track or Jammed Halfway
Wheels pop out of the track when a roller breaks, a cable snaps, or something hits the track hard enough to bend it. A door resting crooked on one side is putting dangerous stress on every part of the system. We get it squared and back on the rails the same visit, and we check the track alignment with a laser before we call it done.
Garage Door Panel Replacement
Panel replacement swaps out a single damaged section of your door without replacing the entire unit. In Orlando, panels take hits from hurricanes, runaway bikes, pickup trucks that misjudge the driveway, and the occasional stray golf ball if you’re near a course. Panel replacement runs $250 to $500 in this market, and it’s the right call when the damage is cosmetic but the rest of the door is structurally sound. We match the panel to your existing door’s manufacturer, style, and color, then install it so the seams line up clean.
Storm and Impact Damage
After a rough Orlando thunderstorm, we see dented aluminum panels, punctures from flying branches, and heat-warped sections on older steel doors. If the structural integrity of a panel is compromised, replacing it beats waiting for it to buckle and bind the whole door. We’ll give you a straight answer on whether one panel makes sense or the whole door is better off replaced.
Color and Style Matching
Getting a replacement panel that looks like it belongs on your door takes more than ordering the same part number. Sun fade on the existing panels, slight style variations between model years, and paint batch differences all matter. We pull the door’s manufacturer info and match against current Clopay and Amarr catalogs before we order anything.
Garage Door Maintenance
Garage door maintenance is a scheduled tune-up that catches failing parts before they strand you on a Monday morning. In Orlando’s humidity and heat, springs, rollers, hinges, and cables age faster than they do in drier climates, and a yearly checkup pays for itself the first time it catches a fraying cable before it snaps. A maintenance visit generally runs $120 to $240, which covers lubing moving parts, tightening hardware, checking spring tension, testing the auto-reverse and sensor beam, and inspecting all rollers, hinges, and cables for wear. We’ll give you a written summary of what we found and what might need attention in the next year.
What We Inspect and Adjust
We work through a checklist that hits every moving part: spring tension and balance, cable condition, roller play, hinge tightness, track alignment, opener force settings, and sensor function. We also check the door’s balance by lifting it manually with the opener disengaged, which tells us more about spring health than any visual inspection.
Extending the Life of Your Door
Regular maintenance stretches the life of a garage door system years beyond its un-serviced lifespan. Doors that get yearly tune-ups don’t surprise you with a snapped spring or a burned-out opener motor. For Orlando homes, where humidity accelerates rust on hardware and heat degrades springs, that yearly visit is the cheapest insurance you’ll ever buy on the door.
Garage Door Roller Replacement
Roller replacement swaps out the small wheels that carry your door up and down the tracks. Rollers wear out, they get noisy, the bearings seize, and the metal ones develop flat spots that make the whole door shudder every time it moves. In Orlando, roller replacement runs $110 to $220 depending on roller type and how many need swapping. We recommend nylon rollers with sealed bearings for most homes because they run noticeably quieter than the old metal ones and don’t rust in Florida humidity.
Noise and Vibration Reduction
If your door sounds like a freight train creeping up the tracks, worn rollers are usually the culprit. Swapping in nylon rollers with sealed ball bearings cuts the noise dramatically and smooths out jerky movement. It’s one of the cheapest quality-of-life upgrades you can make to a garage door system.
When Rollers Fail Completely
A roller that seizes up stops rolling and starts dragging, which wears grooves into the track and puts extra strain on the opener motor. You’ll hear a grinding noise and maybe see the door hesitate or twist slightly at that point. We can tell you which rollers are done and which still have life, so you’re only paying for what actually needs replacing.
Commercial Garage Door Repair
Commercial garage door repair handles the bigger, heavier, and harder-working doors on warehouses, self-storage facilities, loading docks, and retail bays across the Orlando area. These doors cycle dozens of times a day and they can’t afford downtime. Commercial repair in Orlando typically lands between $150 and $600 for common fixes like spring replacement, opener repair, and track realignment, with bigger jobs quoted in writing before work begins. We service commercial operators and heavy-gauge hardware, and our techs are trained on LiftMaster commercial openers and the standard rolling steel and sectional doors used in Florida warehouses.
Downtime Costs and Fast Response
A dock door that won’t open stops trucks, which stops everything else. We understand that a commercial door failure isn’t the same as a residential one. That’s why our live 24/7 phone line exists: you tell us what’s happening, we give you an honest arrival estimate, and our tech tracks live on your phone so your facility manager isn’t standing around wondering.
High-Cycle Wear and Stress
Commercial door springs are rated for cycles, not years, and a busy loading dock burns through a 10,000-cycle spring faster than most people think. We can check your current spring’s cycle rating and recommend upgrades like high-cycle springs and heavier tracks if the door is cycling more than it was built for. That’s the kind of preventative conversation that keeps a commercial operation off emergency calls.
Brands We Service
Our techs train on Chamberlain, Genie, Clopay, and Amarr before they touch your door, and the difference shows. We know where each brand’s common failure points live, which parts interchange, and what the factory specs call for on spring tension and balance. We stock Chamberlain and Genie opener components on the truck, and we’ve done enough Clopay and Amarr panel replacements in Orlando to match colors and styles without guesswork.
Whether you have a Clopay door with a Genie opener, an Amarr door with a Chamberlain motor, or any other combination, we can help. Our parts are manufacturer-approved, our techs know the model lines, and the 365-Day Done Right Promise covers the work no matter what name is stamped on the door.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Snapped or stretched spring. If you hear a loud bang from the garage and the door won’t lift, a torsion spring has failed. The spring is under extreme tension and attempting to open the door manually or with the opener can be dangerous. Call us and we’ll replace the spring pair the same day.
- Door sits crooked or jerks while moving. A door that twists or shudders on its way up has a mechanical problem, usually a bad roller, a weakened spring, or a cable getting ready to fail. The longer it runs like that, the more damage it does to the tracks and opener. Have a tech look at it before it strands you.
- Garage door won’t reverse on obstruction. Your opener’s auto-reverse is a safety feature, not an extra. If the door doesn’t reverse when it hits a box or a test board on the ground, the opener needs immediate attention. This is the system that protects kids, pets, and cars, and it’s not something to put off.
- Loud grinding, squealing, or rattling sounds. A garage door shouldn’t sound like a construction site. Grinding usually means a seized roller or a worn-out bearing. Squealing points at a part that needs lube or replacement. The sooner you fix it, the smaller the bill, because worn components take their neighbors with them.
- Door won’t open at all, or opens slowly. If the opener runs but the door moves like molasses, or the door stays put with the motor whirring, something in the drive system has failed. Slow operation often means a spring is losing tension and the opener is doing all the work. That’s a fast path to a burned-out opener motor, which is a pricier replacement than a spring.
Our Process, Step by Step
- 1
You call or book online, we answer live. Reach us at (850) 790-4744 anytime, day or night, and you’ll talk to a real person in Orlando who can schedule your visit. You’ll get confirmation immediately and a live tracking link so you can watch your tech’s arrival time update in real time.
- 2
Your tech arrives and inspects the door. The technician checks the springs, cables, rollers, tracks, opener, sensors, and hardware, and shows you what they found. We use a digital door balance test and a laser track alignment check to pinpoint issues instead of guessing. You’ll hear what’s wrong in plain language, with the trade terms explained.
- 3
You get a written price before work starts. This is the step that separates us from most Orlando garage door companies. The price is written, it’s locked, and the invoice you pay at the end matches that number exactly. You approve the work first, every time, no exceptions.
- 4
We fix it right the first time. Your tech carries the most common springs, cables, rollers, sensors, and opener parts for Chamberlain, Genie, Clopay, and Amarr doors, which means most repairs happen in a single visit. We don’t order a part and leave you waiting unless it’s genuinely specialized.
- 5
We walk you through the fix and the guarantee. Before we leave, we show you what was replaced and why, we test the door through full open and close cycles, and we confirm everything works. Every repair is covered by the 365-Day Done Right Promise, written in plain language: if the fix fails within a year, we return and make it right at no charge.
How Much Does Garage Door Repair Cost in Orlando?
A typical garage door repair in Orlando runs $150 to $600, and here’s how that breaks down. Spring replacement lands between $180 and $340 depending on spring type and your door’s weight. Cable repair runs $130 to $250. Opener repairs sit between $120 and $320. Panel replacement costs $250 to $500. Track realignment runs $120 to $240, and roller replacement is $110 to $220. New door installation is the big one at $700 to $2,200 depending on material, insulation, and size.
What moves the price is mostly parts and access. A single torsion spring on a standard double door costs less than a pair of high-cycle springs on an insulated carriage-style door. Damage from an Orlando storm that requires panel replacement plus track work stacks up. And if you live in a community with strict HOA appearance rules, matching a panel’s color and style can add a little to the materials cost. That said, our written quote covers everything upfront, so there’s no mystery line item when the invoice comes.
The fastest way to avoid overpaying is to get a written price before work starts and to ask what’s actually wrong before agreeing to parts. Some companies quote a low service fee and make up the difference on inflated parts prices. We don’t do that. Your free estimate covers a full inspection, a written diagnosis, and a locked price, so you can compare or approve right on the spot. Call (850) 790-4744 for an exact quote, any time.
Our Service Area Near Orlando
We serve Garage Door Repair in Orlando and the surrounding communities including Garage Door Repair in Kissimmee, Garage Door Repair in Apopka, Sanford, Winter Garden, Mount Dora, Casselberry, Ocoee, Horizon West, Winter Springs, Altamonte Springs, and Pine Hills. Most Orlando-area jobs see a same-day visit, and our live tracking means you’ll know exactly when your tech pulls onto your street. If you’re on the edge of our coverage, call and we’ll confirm the soonest available time.
Serving Orlando, FL - Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Garage Door Repair in Orlando
Garage door repair covers the diagnosis and correction of any mechanical, electrical, or structural problem keeping your door from opening, closing, or operating safely. That includes springs, cables, rollers, panels, tracks, sensors, openers, and hardware. At home, we explain exactly what’s wrong, give you a written price, and fix it the same visit in most cases.
Most residential repairs take between 45 minutes and two hours once the tech is on site. Spring replacement, roller swaps, sensor fixes, and cable repairs are all same-visit jobs. Panel replacements may require a follow-up visit if we need to order a specific panel style or color match from the manufacturer.
Garage door repair in Orlando typically runs $150 to $600, with spring repair from $180 to $340, cable repair from $130 to $250, and opener repair from $120 to $320. The price depends on the parts involved and your door’s size and weight. Every quote is written and locked before work starts, so you’ll never see the number change. Call (850) 790-4744 for a free estimate.
Yes, we service Chamberlain and Genie openers, along with LiftMaster, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Our techs train on all eight brands and carry common Chamberlain and Genie parts on the truck. That means opener repairs usually happen the same day without waiting on parts.
Yes, we answer live 24/7 at (850) 790-4744. A real person picks up the phone, not a voicemail system. We dispatch same-day for emergency repairs across Orlando, Kissimmee, Apopka, and the surrounding areas, and you’ll see your tech’s live arrival window on your phone.
Every repair is covered by our 365-Day Done Right Promise. That’s a written guarantee: if the fix fails within a year, we return and make it right at no charge. It applies to residential and commercial work, and it’s printed on your invoice, not buried in fine print.
Clear the area around your garage door and move vehicles out of the garage if the door won’t open. Have your opener’s remote and wall pad available so we can test the full system. You don’t need to do anything else; we handle the inspection, diagnosis, and written quote on site.
Schedule Your Garage Door Repair Service in Orlando Today
If your garage door is acting up, don’t wait for a small problem to turn into a snapped spring or a burned-out motor. Call Marlow Garage Door Repair Orlando at (850) 790-4744 for a free, no-obligation estimate, and you’ll get a written price before any work begins. Jaylen Ross and our team are answering live 24/7, with same-day appointments throughout Orlando, Kissimmee, Apopka, and the surrounding areas.
Written by Jaylen Ross, Owner at Marlow Garage Door Repair Orlando, serving Orlando since 2002.